INTERNAL ANTENNA
The internal Antenna is a passive device designed to capture stray radiation in the body of the phone and to re-radiate the signal to improve the phone's performance.
The antenna will work most efficiently when installed properly.
When using the phone try to avoid placing your had over the area where the internal Antenna is installed

INSTALLATION INSTRUCTIONS:
1.Remove the battery from your phone.
2.Wipe the battery compartment with a clean dry cloth to remove any fingerprints or dirt.
3.Remove the yellow backing from the internal antenna,being careful not to leave fingerprints.You may find tweezers helpful in this process.
4.Press the internal antenna onto the body of the phone toward the side that the fixed antenna enters the phone.Be careful when installing the internal antenna in the battery compartment not to let it touch any circuit boards or metal contacts on the body of the phone.
5.Replace the battery

WAVE SCRAMBLER
The "Wave Scrambler" is made from special ceramics and conductive material to help absorb and eliminate harmful electromagnetic waves. The Japanese testing authority.KEC,has confirmed that the "Wave Scrambler" is to filter EM waves emitted from the ear piece of cellular phones up to a frequency of 2,000MHz i.e GSM, CDMA,TDMA,and PCS cellular networks,plus all infoor cordless telephones.

Installation Instructions
1.Remove the "Wave Scrambler" from the external packaging.
2.Tear off protective packaging and press the "Wave Scrambler" onto the earpiece of your cellular phone.
3.Tear off the smaller radial that is marked EMW.
4.Position the smaller radial either next to the "Wave Scrambler" or on the side of the cellular phone.

VALIDITY
The internal Antenna and Wave Scrambler are generally not affected by extreme heat or moisture. However,users are advised to protect the antenna and scrambler from physical damage such as scratches.